Key Publications

Adams, R.D., Cawley, P., Pye, C.J. and Stone, B.J. 'A vibration technique for non-destructively assessing the integrity of structures', J. Mechanical Engineering Science, Vol 20, pp93-100, 1978.

Brownjohn, J.M.W., Steele, G.H., Cawley, P., Adams, R.D. 'Errors in mechanical impedance data obtained with impedance heads', J. Sound and Vibration, Vol 73, pp461-468, 1980.

Cawley, P., Adams, R.D. 'The predicted and experimental natural modes of free-free CFRP plates', J. Composite Materials, Vol 12, pp336-347, 1978.

Cawley, P. and Adams, R.D. 'The location of defects in structures from measurements of natural frequencies', J. Strain Analysis, Vol 14, pp49-57, 1979.

Cawley, P., Adams, R.D. 'A vibration technique for non-destructive testing of fibre composite structures', J. Composite Materials, Vol 13, pp161-175, 1979.

Cawley, P., Adams, R.D. 'Improved frequency resolution from transient tests with short record lengths', J. Sound and Vibration, Vol 64, pp123-132, 1979.

Cawley, P., Adams, R.D. and Plumbridge, W.J. 'The use of vibration measurements for the detection of diffuse creep damage', J. Strain Analysis, Vol 16, pp37-41, 1981.

Cawley, P. 'The reduction of bias error in transfer function estimates using FFT based analysers', ASME J. Vibration, Acoustics, Stress and Reliability in Design, Vol 106, pp29-35, 1984.

Cawley, P. 'The operation of impedance instruments based on the impedance method', J. Composite Structures, Vol 3, pp215-228, 1985.

Cawley, P., Woolfrey, A.M., Adams, R.D. 'Natural frequency measurements for production quality control of fibre composites', Composites, Vol 16, pp23-27, 1985.

Cawley, P. 'The impedance method of non-destructive inspection', NDT International, Vol 17, pp59-65, 1984.

Cawley, P. 'Non-destructive testing of mass produced components by natural frequency measurements', Proc I Mech E, Vol 199, Part B, pp161-168, 1985.

Cawley, P., Rigner, L.G. 'Rapid measurement of modal properties using FFT analysers with random excitation', ASME J. Vibration, Acoustics, Stress and Reliability in Design, Vol 108, pp394-398, 1986.

Cawley, P. 'The accuracy of frequency response function measurements using FFT based analysers with transient excitation', ASME J. Vibration, Acoustics, Stress and Reliability in Design, Vol 108, pp44-49, 1986.

Cawley, P. 'Rapid production quality control by vibration measurements', Materials Evaluation, Vol 45, pp564-568, 1987.

Cawley, P. 'The Sensitivity of the Mechanical Impedance Method of Non-Destructive Testing', NDT International, Vol 20, pp209-215, 1987.

Cawley, P., Clayton, D.L.R. 'A Vibration Technique for the Measurement of Contact Stiffness', Mechanical Systems and Signal Processing, Vol 1, pp273-283, 1987.

Cawley, P. and Adams, R.D. 'The Mechanics of the Coin-Tap Method of Non-Destructive Testing', J. Sound and Vibration, Vol 122, pp299-316, 1988.

Cawley, P., Nguyen, D. 'The Use of the Impedance Method of Non-Destructive Testing on Honeycomb Structures', Mechanical Systems and Signal Processing, Vol 2, pp309-325, 1988.

Cawley, P., Ray, R. 'A Comparison of the Natural Frequency Changes Produced by Cracks and Slots', ASME J. Vibration, Acoustics, Stress and Reliability in Design, Vol 110, pp366-370, 1988.

Cawley, P., Sarsentis, N. 'A Quick Method for the Measurement of Structural Damping', Mechanical Systems and Signal Processing, Vol 2, pp39-47, 1988.

Cawley, P., Adams, R.D. 'The Sensitivity of the Coin-Tap Method of Non-Destructive Testing', Materials Evaluation, Vol 47, pp558-563, 1989.

Cawley, P.,Theodorakopoulos, C. 'The Membrane Resonance Method of Non-Destructive Testing', J. Sound and Vibration, Vol 130, pp299-311, 1989.

Cawley, P. 'Is Laboratory Teaching Effective?', Int J Mechanical Engineering Education, Vol17, pp15-27, 1989.

Cawley, P. 'The Effectiveness of Engineering Degree Courses', Assessment and Evaluation in Higher Education, Vol 14, pp228-241, 1989.

Cawley, P. 'The Sensitivity of an NDT Instrument Based on the Membrane Resonance Method', NDT International, Vol 22, pp209-216, 1989.

Guyott, C.C.H., Cawley, P., Adams, R.D. 'The non-destructive testing of adhesively bonded structure,pp a review', J. Adhesion, Vol 20, pp129-159, 1986.

Guyott, C.C.H., Cawley, P., Adams, R.D. 'Vibration characteristics of the Mk II Fokker Bond Tester probe', Ultrasonics, Vol 24, pp318-324, 1986.

Guyott, C.C.H., Cawley, P., Adams, R.D. 'Use of the Fokker Bond Tester on joints with varying adhesive thickness', Proc I Mech E, Vol 201, part B, pp41-49, 1987.

Guyott, C.C.H., Cawley, P. 'Evaluation of the Cohesive Properties of Adhesive Joints Using Ultrasonic Spectroscopy', NDT International, Vol 21, pp233-240, 1988.

Guyott, C.C.H., Cawley, P. 'The Measurement of Through Thickness Plate Vibration Using a Pulsed Ultrasonic Transducer', J. Acoustical Society of America, Vol 83, pp623-631, 1988.

Guyott, C.C.H., Cawley, P. 'The Ultrasonic Vibration Characteristics of Adhesive Joints', J. Acoustical Society of America, Vol 83, pp632-640, 1988.

Pialucha, T., Guyott, C.C.H. and Cawley, P. 'Amplitude Spectrum Method for the Measurement of Phase Velocity', Ultrasonics, Vol 27, pp270-279, 1989.